Shop / LED Race Clock

LED RACE CLOCK

Built for track & field, cross country and road race timing

Already own one? Service & troubleshooting guide
Designed by timers, for timers

Race time everyone can see, start to finish.

The Finished Results LED Race Clock is a plug-and-play timing display built for track & field, cross country and road races. Built-in wifi and Ethernet connect it directly to your timing software. The powder-coated aluminum enclosure and weather-resistant design keep it running rain or shine. Set up on the included speaker stand in minutes, or hang it from the eye hooks on a finish truss.

Features

Outdoor brightness

192 x 64 px of P5 SMD LED across a 39 inch face, readable from the far side of the track.

Weather resistant

Powder-coated aluminum enclosure with ventilation, designed for all-weather outdoor use.

Wifi and Ethernet

A weatherproof RJ45 on the case, plus a built-in wifi connection.

Quick setup

Mounts on the included speaker stand or hangs from the eye hooks on a finish truss. Integrated carry handles on the case.

Universal power

Supports 110/220V. Runs from a standard outlet at any venue, domestic or international, or straight off a generator.

Double sided option

Single or double sided configurations for maximum visibility at the finish line.

The race clock on its speaker stand, showing Women 1500 and 4:29.7
Mounts on the included speaker stand, or hangs from the eye hooks
The side of the case with the blue twist-lock power connector and the Ethernet port
Twist-lock power and weatherproof Ethernet on the case
The rear face of a double sided clock
Matching rear LED face on double sided clocks

One clock, every event

Event name and running time during the race, paging results after. Lap counter and interval clocks run from the included number pad.

Display modes

  • Timer, count-up and count-down
  • Results paging
  • Lap counter
  • Field events

Supported software

Wifi and Ethernet connect straight to your timing software:

  • FinishLynx
  • FieldLynx
  • RM Timing
  • Eagle Eye
  • Agee Race Timing

Photos

At meets and up close. Tap a photo to see it larger.

Two race clocks above the finish banner at the Mt. SAC XC Invite
Mt. SAC XC Invite: two clocks above the finish banner
A race clock showing Men 8K and 8:23:30 hanging from a Pac-12 finish arch
Hanging from the finish arch at a Pac-12 cross country championship
Race clocks at a track meet: one on a tripod showing Women 4x100 and 12:10:26, another showing javelin results
At a track meet: running time on the stand (right) and javelin results (left)
A race clock on its stand beside a cross country finish chute
On the speaker stand at a cross country finish
A race clock hanging from a finish truss, showing Citizens Race and 7:30:32
Hanging from the eye hooks on a finish truss
The race clock on its speaker stand, showing Test Race and 0.0
On the included speaker stand
The race clock from the side, showing Test Meet and 4:18:51
Twist-lock power and Ethernet on the end of the case, eye hooks and a handle on top
Close-up of the blue twist-lock power connector, the Ethernet port and the vents
Twist-lock power, weatherproof Ethernet and ventilation
Close-up of an eye hook on top of the case and the wifi antenna connector
An eye hook for hanging, and the wifi antenna connector
Close-up of the underside of the case with the stand socket
Underneath: the socket the speaker stand fits into
The LED Race Clock showing LED Raceclock and 10:34.1

Technical specifications

Dimensions 39.25 x 14 x 4.75 in (99.7 x 35.6 x 12.1 cm)
Weight 21.5 lb (9.8 kg)
Resolution 192 x 64 px, P5 SMD
Power 110/220V
Connectivity Ethernet / wifi
Enclosure Powder-coated aluminum
Configurations Single / double sided

Included with every purchase

  • LED Race Clock
  • Speaker stand
  • Soft case
  • Number pad
  • Neutrik power cable
  • Wifi antenna
Product brochure
Two pages: features, specs and pricing. PDF, 710 KB.

Pricing

Single sided

$3,595

Complete kit, speaker stand included

Buy now

Double sided

$4,495

Two-face visibility, finish line ready

Buy now

Refurbished

  • Single sided$2,495
  • Double sided$3,595

Every refurbished unit is fully tested and ships with the complete kit. Ask sales what is available. Email sales.

Options

  • Hard transport case+$500
  • Additional 1-year warranty+$199
  • Additional 2-year warranty+$349

Choose options when you order.

Ships by freight. Shipping is added to your order at checkout.

What timers say

“I had both programs displaying times within ten minutes of taking the clock out of the box.”

Read the full review

The display is bright and easy to see, even in sunlight. The cost difference for what it adds to do the double sided was a no brainer for me, especially when comparing to some of the other fully finished display solutions on the market. At the finish line, I don't get people trying to crowd in front of the clock (which often would be in front of the camera) to see the times, because it displays on both sides. The font size adjusts to fit names as results are scrolling through, so unless it's a really long name, it doesn't get cut off.

We use FinishLynx for our track and field meets, and Agee Race Timing for our RFID readers for Cross Country and Road/Trail races. Super easy to integrate with both programs... I had both programs displaying times within ten minutes of taking the clock out of the box. For XC and Road/Trail races the name, place and finish time automatically pops up when the ART system picks up a chip read. For track meets the results scroll as we are reading the image. Parents and coaches love it, and it has become customary that once they recognize it does that, their phones are at the ready to try to get that picture with their name/time on the display. It really adds a nice touch to our events.

Support can take a product from good to great, and the support piece Finished Results provided is an important one for me personally. Before I made the initial investment in this equipment, Chris and the folks at Finished Results were super helpful in explaining the way it works and were even able to help me when I had one take a tumble during my teardown process after a meet. The display quit working, but they were able to give me a few steps that got it back up and running. That was about a year ago and I've been using it regularly since then. To me, if someone is going to stand behind their products in that manner, it means something. I felt good enough about the purchase for myself that we just got four more for some of our other timers on the team.

Micah Mobley
Above and Beyond Timing, LLC

“If you are on the fence about a display, I would say jump on the side of this display. It's an investment that has added value to the service we provide our clients.”

Read the full review

When I first started in this business I didn't know what I didn't know. I just went with what I saw others doing, and that included the display options at the time. Once I got my feet under me and started actually doing a little more research and digging around, I came across these clocks. So glad I did. If you are on the fence about a display, I would say jump on the side of this display. It's an investment that has added value to the service we provide our clients. This is not to say my original display is "bad", as we do still use it, but I've actually had clients request sending someone from our team who has this display if possible.

Above and Beyond Timing, LLC
Own a Finished Results race clock? Service & troubleshooting guide 12 step-by-step procedures, each with its own video: from turning the clock on to replacing the Raspberry Pi, LED modules and cables. Find your problem and fix it at the venue. Open the guide

Bring race-day timing everyone can see

Request a quote or a demo for your timing company.